Old film off, clean glass back

Window Tint Removal

Purple, bubbling, peeling, or just too dark for a fix-it ticket. We take old film off with steam and leave the glass clean — and the defroster working.

Removing tint is slower and fussier than putting it on. The film usually comes off in pieces, and the adhesive stays behind on the glass. Done carelessly, it costs you a rear defroster.

When tint needs to come off

  • It has turned purple or brown. The dye has broken down. It will not recover.
  • It is bubbling or peeling. The adhesive has failed.
  • You got a fix-it ticket. The cited windows have to be cleared before an officer will sign it off. See our tint ticket guide.
  • You are returning a lease and want the car back to original. See tinting a leased car.
  • You want new film. New tint cannot go over old tint; the old layer comes off first.

How we remove it

We use steam. Heat and moisture soften the adhesive so the film releases from the glass instead of tearing, and most of the glue comes away with it. What is left is dissolved and wiped off, and the glass is cleaned.

Why the rear window matters: the defroster lines are printed on the inside surface of the glass — the same surface the film is stuck to. Pull old film off dry or take a razor blade to the glue, and the lines come off with it. That is the most common damage from do-it-yourself removal, and it is not repairable. Steam and patience avoid it.

What makes removal harder

Older film, cheaper film, and film that has baked in the sun for years all come off in smaller pieces and leave more adhesive. That is why the price is a range: we look at the car and tell you the figure before we start.

Pricing: $50–$150 per vehicle depending on the film's age and condition. Two front doors for a fix-it ticket are at the low end. We always quote before starting.

What's included

  • Steam removal — no dry scraping on the glass
  • Rear defroster lines protected
  • Adhesive residue fully removed and glass cleaned
  • Single windows or the whole vehicle
  • Quoted before work begins
  • New film can be installed in the same visit

Ideal for

  • Purple, faded, or bubbled tint
  • Fix-it tickets for front-window tint
  • Lease returns
  • A used car that came with tint you do not want
  • Replacing old dyed film with ceramic

Our installation process

01
Inspect & quote
02
Steam the film
03
Peel in sections
04
Dissolve adhesive
05
Clean the glass
06
Check defroster
07
Re-tint (optional)
08
Done

Common questions

How much does window tint removal cost?

$50–$150 for a vehicle, depending on how old the film is and what condition it is in. We quote before starting.

How long does tint removal take?

Two front doors are usually under an hour. A full vehicle with old, brittle film can take a few hours.

Will removing tint damage my rear defroster?

Not when it is done with steam. Defroster damage comes from pulling film dry or scraping adhesive with a blade.

Can I remove tint myself?

Side windows, yes, with patience and a steamer. We would not recommend doing the rear window yourself because of the defroster lines.

Can you remove and re-tint the same day?

Yes, in most cases.

Book your install

Ready when you are.

Pick a date and we'll lock it in. Or call us direct — we pick up.

🔐 Owner Portal